Tel:+86 20 3608 5899 Contact About Us
Home > Matainment & Support > Repair

REPAIRS

The following instructions should help you to make minor repairs yourself.

  • If your product loses pressure, then make sure the valve is not loose.

  • Use the valve key (repair tool box) to make sure the valve is tight.

  • To check the product for holes, sprinkle it with soapy water.

  • Clean the before gluing area around the hole and the PVC.

  • After applying glue, stick the same color PVC material on the product.

  • Warm the adhesive with a hot air dryer until it is sticky again.

    NOTE : Be careful that the temperature is not too high is high. The max. Temperature is 80 to 90 ° C!

  • Press the pvc patch with one flat tool on the marked area fixed.

CLEANING, FOLDING & STORING

To increase the life of the products and to ensure their proper functioning,we recommend that you regularly inspect the products and clean them if necessary.

  • Clean the products regularly with clear water to avoid that the chlorine attacks the PVC

  • Before the products are stored, it is veryimportant that they are completely dry toprevent mold growth.

  • Empty the products with the electric pumpcompletely until it is no more air inside the products

  • Fold the products carefully together (at least two persons required).

  • Close the valve before folding the product to ensure that the vacuum is maintained.

    NOTE :Do not pull the product on the floor,pulling heavy products on the ground will be cause damage!

  • Put the products in the transport bags and store them in a dry place.

    NOTE : If you have enough space for storage, you can use yours store products when inflated.